Takardar Bayani na Fitilar LED 1224SYGC/S530-E2 - Kore-Rairayi Mai Haske - 25mA - 60mW - Takardar Fasaha ta Hausa

1. Bayyani Game da Samfur

1224SYGC/S530-E2 fitilar LED ce mai ƙarfin haske wacce aka ƙera don aikace-aikacen da ke buƙatar ƙarfin haske mafi girma. Tana amfani da fasahar guntu ta AlGaInP don samar da launin kore-rairayi mai haske tare da kullin resin mai tsabta kamar ruwa. Wannan ɓangaren yana da halayen dogaro, ƙarfi, da bin ƙa'idodin muhalli kamar rashin gubar da RoHS.

1.1 Fa'idodi na Asali

• Ƙarfin Haske Mai Girma:An ƙera shi musamman don aikace-aikacen da ke buƙatar fitar da haske mafi girma.
• Zaɓin Kusurwoyin Dubawa:Ana samunsa a cikin nau'i-nau'i daban-daban don dacewa da buƙatun aikace-aikace daban-daban.
• Marufi Mai Ƙarfi:An ƙera shi don aiki mai dogaro a cikin yanayi daban-daban.
• Bin Ƙa'idodin Muhalli:Babu gubar kuma ya bi ƙa'idodin RoHS.
• Sassauƙan Marufi:Ana samunsa akan tef da reel don hanyoyin haɗawa ta atomatik.

1.2 Kasuwa da Aikace-aikace da Ake Nufa

Wannan LED tana nufin kasuwannin kayan lantarki na mabukaci da hasken baya na nuni. Aikace-aikacenta na farko sun haɗa da:

• Na'urorin talabijin
• Na'urorin kallon kwamfuta
• Wayoyi
• Na'urori na gaba ɗaya na kwamfuta da masu nuni

2. Zurfin Binciken Sigogi na Fasaha

Wannan sashe yana ba da cikakken bayani, fassarar haƙiƙa ta mahimman sigogi na fasaha da aka ƙayyade a cikin takardar bayani.

2.1 Matsakaicin Matsakaicin Matsakaici

Waɗannan ƙididdiga suna ayyana iyakokin da za su iya haifar da lalacewa na dindindin ga na'urar. Ba a ba da shawarar aiki a ko kusa da waɗannan iyakokin na tsawon lokaci.

• Ci gaba da Igiyar Gaba (I_F):25 mA. Wannan shine matsakaicin igiyar DC da za a iya ci gaba da amfani da ita.
• Kololuwar Igiyar Gaba (I_FP):60 mA. Ana iya yarda da wannan igiyar mafi girma kawai a ƙarƙashin yanayin bugun jini (ayyukan aiki 1/10 a 1 kHz).
• Ƙarfin Lantarki na Baya (V_R):5 V. Wuce wannan ƙarfin lantarki a cikin karkatar da baya na iya haifar da rushewar haɗin gwiwa.
• Rushewar Wutar Lantarki (P_d):60 mW. Matsakaicin wutar lantarki da marufi zai iya ɓarnawa a yanayin zafin yanayi na 25°C.
• Aiki & Zafin Ajiya:Ya kewayo daga -40°C zuwa +85°C (aiki) da -40°C zuwa +100°C (ajiye).
• Zafin Solder (T_sol):Yana jure 260°C na dakika 5, wanda ya dace da daidaitattun bayanan sake karkatar da rashin gubar.

2.2 Halayen Lantarki-Haske

Ana auna waɗannan sigogi a ƙarƙashin daidaitattun yanayin gwaji (Ta=25°C, I_F=20mA) kuma suna ayyana aikin na'urar.

• Ƙarfin Haske (I_v):Matsakaicin ƙima shine 100.0 mcd, tare da mafi ƙarancin 63.0 mcd. Wannan yana nuna fitarwa mai haske wanda ya dace da aikace-aikacen nuni.
• Kusurwar Dubawa (2θ_1/2):Digiri 25. Wannan kusurwar dubawa ce kunkuntar, tana tattara haske a cikin katako mai shugabanci gaba.
• Kololuwar Tsawon Zango (λ_p):575 nm. Tsawon zango wanda aka fitar da ƙarfin haske ya fi girma.
• Mafi Rinjaye Tsawon Zango (λ_d):573 nm. Tsawon zango guda ɗaya wanda idon ɗan adam ya gane wanda ya dace da launin LED.
• Ƙarfin Lantarki na Gaba (V_F):Yawanci 2.0V, ya kewayo daga 1.7V zuwa 2.4V a 20mA. Wannan yana da mahimmanci don ƙirar da'irar tuƙi da lissafin amfani da wutar lantarki.
• Igya ta Baya (I_R):Matsakaicin 10 µA a V_R=5V, yana nuna ingantaccen ingancin haɗin gwiwa.

Jurewar Aunawa:Takardar bayani ta lura da takamaiman rashin tabbas: ±0.1V don V_F, ±10% don I_v, da ±1.0nm don λ_d. Dole ne a yi la'akari da waɗannan a cikin aikace-aikacen ƙira masu mahimmanci.

3. Binciken Lanƙwasa Aiki

Lanƙwasa halaye na yau da kullun suna ba da haske game da halayen na'urar a ƙarƙashin yanayi daban-daban.

3.1 Rarraba Siffa & Jagora

LanƙwasaƘarfin Dangantaka da Tsawon Zangoyana nuna kunkuntar bakan da ke tsakiya a kusa da 575 nm, halayen fasahar AlGaInP, wanda ke haifar da launin kore-rairayi mai cika. LanƙwasaJagorayana tabbatar da kusurwar dubawa na digiri 25 a zahiri, yana nuna yadda ƙarfin haske ke raguwa a kusurwoyin da suka wuce maki rabin ƙarfi.

3.2 Haɗin Lantarki & Zafi

• Igya ta Gaba da Ƙarfin Lantarki na Gaba (Lanƙwasa I-V):Wannan lanƙwasa ba layi daya bane, na yau da kullun na diode. Ƙarfin lantarki yana ƙaruwa da logarithmic tare da igiya. Masu ƙira suna amfani da wannan don tantance ƙarfin lantarki na tuƙi da ake buƙata don igiyar da aka yi niyya.
• Ƙarfin Dangantaka da Igya ta Gaba:Fitar haske yana ƙaruwa tare da igiya amma bazai zama cikakken layi daya ba, musamman a manyan igiyoyin da inganci zai iya raguwa saboda dumama.
• Ƙarfin Dangantaka da Zafin Yanayi:Fitar hasken LED gabaɗaya yana raguwa yayin da zafin yanayi ya tashi. Wannan lanƙwasa yana ƙididdige wannan raguwa, wanda yake da mahimmanci don sarrafa zafi a cikin aikace-aikace.
• Igya ta Gaba da Zafin Yanayi:Wannan lanƙwasa mai yiwuwa yana kwatanta matsakaicin izinin igiyar gaba da za a iya raguwa yayin da zafin jiki ya ƙaru don ci gaba da kasancewa cikin iyakar ɓarnawar wutar lantarki, yana tabbatar da dogon lokacin dogaro.

4. Bayanin Injiniya & Marufi

4.1 Girman Marufi

LED tana da daidaitaccen marufi mai jagora radial (wanda aka fi sani da marufin \"fitila\"). Muhimman bayanan girma daga takardar bayani sun haɗa da:

• Duk girmansu suna cikin milimita.
• Dole ne tsayin flange ya kasance ƙasa da 1.5mm (0.059\").
• Daidaitaccen jurewar ±0.25mm ya shafi sai dai idan an ƙayyade.

Tasirin Ƙira:The exact dimensions provided in the drawing are critical for PCB footprint design, ensuring proper fit and alignment during assembly.

4.2 Gano Polarity

Don marufan LED na radial, ana gano cathode ta wurin fili a gefen ruwan tabarau, gajeriyar jagora, ko wasu alama. Dole ne a yi amfani da hanyar tantancewa ta musamman tare da zanen girman marufi.

5. Jagororin Solder & Haɗawa

Kulawa daidai yana da mahimmanci don hana lalacewa da tabbatar da dogaro.

5.1 Siffar Jagora

• Lankwasa jagororin a wani batu aƙalla 3mm daga tushen kwan fitila na epoxy.
• Yi siffakafin soldering.
• solder. Guji damuwa da marufi. Ramin PCB mara daidaito wanda ke haifar da damuwa na jagora zai iya lalata epoxy da LED.
• Yanke jagororin a zafin daki.

5.2 Yanayin Ajiya

• Ajiye a ≤30°C da ≤70% Zazzabin Dangi bayan karɓa.
• Tsawon rayuwar shiryayye shine watanni 3 a ƙarƙashin waɗannan yanayi. Don ajiye tsawon lokaci (har zuwa shekara 1), yi amfani da akwati mai rufi tare da nitrogen da desiccant.
• Guaji saurin canjin zafin jiki a cikin yanayi mai ɗanɗano don hana hazo.

5.3 Sigogi na Solder

Kiyaye mafi ƙarancin nisa na 3mm daga haɗin solder zuwa kwan fitila na epoxy.

• Solder na Hannu:Zafin ƙarshen guga matsakaicin 300°C (don guga 30W), lokacin solder matsakaicin dakika 3.
• Solder Wave/Dip:Preheat matsakaicin 100°C na 60 sec. Bahon solder matsakaicin 260°C na dakika 5.
• Guaji damuwa akan jagororin yayin hanyoyin zafi mai girma.
• Kada ku yi solder (dip/hannu) fiye da sau ɗaya.
• Bari LED su sanyaya zuwa zafin daki a hankali bayan solder, kare su daga girgiza/girgiza yayin sanyaya.

5.4 Tsaftacewa

Idan ya cancanta, tsaftace kawai da barasa na isopropyl a zafin daki na ≤1 minti. Kada ku yi amfani da tsaftacewa ta ultrasonic sai dai idan an riga an cancanta, saboda zai iya haifar da lalacewa.

5.5 Gudanar da Zafi

Gudanar da zafi yana da mahimmanci. Ya kamata a rage ƙimar igiyar aiki daidai gwargwado bisa zafin yanayi, yana kallon lanƙwasa raguwa a cikin ƙayyadaddun bayanai. Rashin isasshen nutsewar zafi na iya haifar da raguwar fitar haske, canjin launi, da gajartar tsawon rayuwa.

6. Bayanin Marufi da Oda

6.1 Ƙayyadaddun Marufi

An yi marufin LED don hana fitar da lantarki na electrostatic (ESD) da lalacewar danshi:

• An yi marufi a cikin jakunkunan anti-electrostatic.
• An sanya su a cikin akwatunan ciki.
• An aika da su a cikin akwatunan waje.

6.2 Adadin Marufi

• Mafi ƙarancin 200 zuwa 1000 guda a kowace jaka.
• Jakuna 5 a kowace akwatin ciki.
• Akwatunan ciki 10 a kowace akwatin waje.

6.3 Bayanin Alama

Alamomi akan marufi sun haɗa da lambobin bin diddigin da ƙayyadaddun bayanai:

• CPN:Lambar Bangaren Abokin Ciniki.
• P/N:Lambar Bangaren Masana'anta (misali, 1224SYGC/S530-E2).
• QTY:Adadin da ke ƙunshe.
• CAT:Matsayi ko kwandon aiki.
• HUE:Lambar Tsawon Zango Mai Rinjaye.
• LOT No:Lambar rukunin masana'antu da za a iya gano su.

7. Shawarwarin Aikace-aikace

7.1 Yanayin Aikace-aikace na Yau da Kullun

Bayan aikace-aikacen da aka jera (TV, Na'urar Kallo, Wayar), wannan LED ta dace da:

• Masu nuni na matsayi akan kayan aikin masana'antu.
• Hasken baya don ƙananan nunin LCD.
• Fitilolin nuni da aka ɗora a kan panel.
• Masu nuni na cikin mota (ya dogara da ƙarin cancanta don ƙa'idodin mota).

7.2 Abubuwan da Ake La'akari da Ƙira

• Iyakance Igya:Koyaushe yi amfani da resistor na jerin ko direba mai igiya akai don iyakance igiya zuwa ≤25mA ci gaba.
• Shimfidar PCB:Tabbatar ramuka sun dace da tazarar jagora daidai don guje wa damuwar injiniya.
• Ƙirar Zafi:A cikin aikace-aikacen zafin yanayi mai girma ko igiya mai girma, yi la'akari da ikon PCB na yin aiki azaman nutsewar zafi ko samar da ƙarin sanyaya.
• Kariyar ESD:Duk da yake jakar tana da anti-static, kulawa yayin haɗawa ya kamata ya bi ƙa'idodin ESD.

8. Tambayoyin da Ake Yawan Yi (Dangane da Sigogi na Fasaha)

Q1: Shin zan iya tuƙi wannan LED a 30mA don ƙarin haske?
A1: A'a. Matsakaicin Matsakaicin Matsakaici don ci gaba da igiyar gaba shine 25mA. Wuce wannan ƙimar yana haifar da haɗarin lalacewa na dindindin kuma yana ɓata ƙayyadaddun bayanai na dogaro. Don ƙarin haske, zaɓi LED da aka ƙidaya don igiya mafi girma.

Q2: Matsakaicin V_Fshine 2.0V, amma da'irata tana amfani da wadata na 5V. Wane ƙimar resistor ya kamata in yi amfani da shi?
A2> Don igiyar da aka yi niyya na 20mA: R = (V_supply- V_F) / I_F= (5V - 2.0V) / 0.020A = 150 Ω. Yi amfani da daidaitaccen resistor 150Ω. Koyaushe lissafta ta amfani da mafi yuwuwar V_F(2.4V) don tabbatar da cewa igiya ba ta wuce iyakoki ba idan kun sami ɓangaren V mai girma: R_min = (5V - 2.4V) / 0.025A = 104 Ω._FQ3: Menene ma'anar resin \"ruwa mai tsabta\"?

A3> Yana nufin ruwan tabarau na epoxy gaba ɗaya bayyane ne, ba a yada shi ko an yi shi ba. Wannan yana haifar da mafi ƙarfi, launi mai cika daga guntu amma yana iya sa tushen haske (ƙaramin guntu) ya fi bayyana a matsayin \"wurin zafi\" idan aka kwatanta da ruwan tabarau da aka yada.
Q4: Yaya mahimmanci ne mafi ƙarancin nisa na 3mm don lanƙwasa jagora da solder?

A4> Yana da mahimmanci sosai. Lanƙwasa ko solder kusa da kwan fitila na epoxy yana canja wurin zafi da damuwar injiniya kai tsaye zuwa mutuwar semiconductor da igiyoyin igiya a ciki, waɗanda suke da rauni. Wannan na iya haifar da gazawar nan take ko batutuwan dogaro na ɓoye.
9. Gabatarwar Fasaha & Trends

9.1 Ka'idar Aiki

Wannan LED ya dogara ne akan kayan semiconductor na AlGaInP (Aluminum Gallium Indium Phosphide). Lokacin da aka yi amfani da ƙarfin lantarki na gaba, electrons da ramuka suna sake haɗuwa a cikin yanki mai aiki na semiconductor, suna sakin makamashi a cikin nau'in photons (haske). Takamaiman abun da ke cikin gami na AlGaInP yana ƙayyade makamashin bandgap, wanda kai tsaye yana ayyana kololuwar tsawon zango na hasken da aka fitar, a wannan yanayin, a cikin bakan kore-rairayi (~573-575 nm). Marufin epoxy mai tsabta kamar ruwa yana aiki azaman ruwan tabarau, yana siffata fitar haske kuma yana ba da kariyar muhalli.

9.2 Trends na Ci gaba

Duk da yake wannan cikakken marufi ne ta hanyar rami, trends na masana'antu suna motsawa zuwa:

Marufan Surface-Mount Device (SMD):

• Don haɗawa ta atomatik da ƙananan siffofi.Mafi Girman Ingantaccen Aiki:
• Ci gaba da ingantattun kayan aiki da girma na epitaxial suna haifar da ƙarin lumens a kowace watt (inganci).Ingantaccen Daidaituwar Launi:
• Ƙarfafa kwandon tsawon zango da ƙarfin haske.Haɗin kai:
• Haɗa guntu LED da yawa ko ƙara kayan lantarki na sarrafawa cikin marufi guda ɗaya.1224SYGC/S530-E2 yana wakiltar ingantaccen mafita, mai kyawawan halaye a cikin tsarin marufi na gargajiya, wanda ya dace da aikace-aikacen da takamaiman halayen gani da hawan rami suke da fa'ida.

The 1224SYGC/S530-E2 represents a reliable, well-characterized solution in a classic package format, suitable for applications where its specific optical characteristics and through-hole mounting are advantageous.