Takardun Tsarin G9 LED Filament - Girma 12x28x2.3mm - AC230V - Wutar 2.8-3.4W - Zazzabin Launi 2200K-6500K - Takardun Fasaha

1. Bayyani na Samfur

1.1 Bayyani na Gabaɗaya

Samfurin wannan LED ne farin wanda aka yi ta amfani da chip shudi da canza phosphor. Girman fakitin: 12mm x 28mm x 2.3mm. Yana da tsarin fakitin hadaddun kuma haske mai cikakken kusurwa 360°, mai dacewa da aikin walda. Matsayin jin daɗin danshi: Mataki 5. Ya bi ka'idojin RoHS.

1.2 Manyan Siffofi

• Fakitin Hadaddun: ya haɗa chip da phosphor a cikin siffa mai taƙaita.
• Hasken Cikakken Kusurwa 360°: yana fitar da haske daidai a kowane bangare.
• Mai dacewa da Aikin Walda: yana aiki da na'ura mai sarrafa kai.
• Matsayin Jin Daɗin Danshi 5: yana buƙatar amfani a cikin sa'o'i 24 bayan buɗewa.
• Ya Bi ka'idojin RoHS: ba shi da abubuwa masu haɗari.

1.3 Amfani

Babban amfani ya haɗa da fitilun LED halogen (sauya), haske na ado, hasken cikin gida, da hasken gabaɗaya. Faɗin kusurwar kallo da babban CRI sun sa ya dace da wuraren zama da kasuwanci.

2. Binciken Siffofin Fasaha

2.1 Halayen Lantarki da Hasken Haske (Ts=25°C)

An ƙera LED ɗin don aiki a ƙarfin AC na 230V (60Hz). Ƙarfin gabanci yana tsakanin 225-235V. Hasken haske ya bambanta daga 300 zuwa 500 lumens, ya danganta da buhun. Kusurwar kallo 360° tana ba da rarraba haske daidai. Fihirisar haɗin launi aƙalla 80 ne, tare da R9 >= 0, wanda ke tabbatar da sake haɗin launi mai kyau ga yawancin amfani. Amfani da wuta yana tsakanin 2.8W da 3.4W, yana mai da shi mai amfani da makamashi.

2.2 Matsakaicin Ƙididdiga Cikakkun

Wadannan ƙididdiga ba za a iya wuce su ba a lokacin aiki. Rushewar wuta an iyakance shi zuwa 3.73W. LED ɗin an ƙididdige shi don ESD na 2000V (HBM). Zazzabin aiki da ajiya suna daga -40°C zuwa +85°C, tare da mafi girman zazzabin haɗin 125°C. Yin amfani da ƙididdiga sama da hakan na iya haifar da lalacewa ta dindindin.

3. Tsarin Binning

3.1 Buhunan Zazzabin Launi

Jerin LED ɗin yana samuwa a cikin zazzabin launi da yawa: 2200K, 2400K, 2700K, 3000K, 4000K, 5000K, 6500K. Kowane CCT yana da buhunan lumen da yawa. Misali, 2700K yana da buhun Rank430 (430-460lm), Rank480 (450-510lm), da sauransu. Haɗin chromaticity na CIE an ayyana shi daidai ga kowane buhun. Duba zanen CIE da teburan haɗin a cikin takardun don cikakkun iyakokin buhun.

3.2 Buhunan Hasken Haske (Luminous Flux)

Jimlar hasken haske yana tsakanin 300-500lm a AC230V. A cikin kowane CCT, ana rarraba buhunan ta hanyar kewayon haske (misali, 430-460lm, 450-510lm, 460-520lm, 470-530lm). Abokan ciniki na iya ƙayyade lambar buhun da suke so don daidaiton aiki.

4. Binciken Layukan Aiki

Layukan da ke gaba suna kwatanta halin LED ɗin a ƙarƙashin yanayi daban-daban.

4.1 Ƙarfin Gabanci da Ƙarfin Hasken Dangantaka

Yayin da ƙarfin gabanci yake ƙaruwa daga 200V zuwa 300V, ƙarfin hasken dangantaka ya tashi zuwa mafi girma sannan ya yi maimaitawa. Yankin aiki mafi kyau yana kusa da 225-235V.

4.2 Zazzabin Muhalli da Ƙarfin Hasken Dangantaka

Hasken haske na dangantaka yana raguwa yayin da zazzabin muhalli yake ƙaruwa. A 100°C, hasken yana faɗuwa zuwa kusan 70% na darajar a 25°C. Gudanar da zazzabi yana da mahimmanci don kiyaye fitowar haske.

4.3 Zazzabin Surface na Tsakiya da Ƙarfin Hasken Dangantaka

Hanya iri ɗaya: yayin da zazzabin surface na tsakiya yake ƙaruwa, ƙarfin hasken dangantaka yana raguwa. Yakamata a kiyaye LED ɗin ƙasa da 85°C don mafi kyawun aiki.

4.4 Ƙarfin Gabanci da Zazzabi

Ƙarfin gabanci yana nuna ma'aunin zazzabi mara kyau: yana raguwa a layi tare da ƙaruwar zazzabi. A 100°C, Vf yana kusan 227V idan aka kwatanta da 235V a 25°C.

4.5 Zazzabin Surface na Tsakiya da Ƙarfin Gabanci na Gaba

Ƙarfin gabanci na gaba (mA) yana raguwa yayin da zazzabi yake ƙaruwa, yana nuna cewa direban LED dole ne ya rama tasirin zazzabi.

4.6 Zanen Radiyya

Tsarin radiyya yana nuna haske daidai a dukkan kwatancen kwance, yana tabbatar da kusurwar kallo 360°. Bambancin ƙarfi yana da ƙanƙanta.

4.7 Haɗin Chromaticity da Zazzabi

Haɗin x da y na CIE suna canzawa kaɗan tare da zazzabi, amma suna kasancewa a cikin iyakokin buhun da aka ayyana don kewayon da aka ƙididdige (-40 zuwa +85°C).

4.8 Rarraba Spectrum

Spectrum ɗin ya ƙunshi kololuwa shudi a kusan 450nm da kuma fitowar phosphor rawaya mai fadi da aka tsaki a ~580nm, yana haifar da haske fari.

5. Bayanin Injiniya da Marufi

5.1 Girman Fakitin

Girman fakitin: 12mm (tsawo) x 28mm (faɗi) x 2.3mm (tsawo). Bambance-bambance ±0.5mm sai dai in an faɗi akasin haka. LED ɗin yana da lantarki biyu don haɗin lantarki. Zanen da aka juya yana nuna polarity daidai. Alamar kiyaye ESD tana kan fakitin.

5.2 Girman Akwatin Suction

Akwatin suction da ake amfani da shi don marufi yana da girman 750mm x 800mm (dangane da bambance-bambance ±0.1mm). Kowane akwatin yana ƙunshe da guda 50.

5.3 Bayanin Lakabi

Lakabi sun haɗa da: Lambar Sashi (P/N), Lambar Spec (S/N), Lambar Lot (L/N), Lambar Buhun, Buhun Chromaticity (X/Y), Hasken Haske (Φ), Ƙarfin Gabanci (Vf), Fihirisar Haɗin Launi (Ra), Adadin (QTY), da Kwanan wata. Ana iya haɗa barcode.

6. Jagoran Walda da Haɗawa

6.1 Kariyar Gudanarwa

• Ka riƙe sassan ta gefe ta amfani da tweezers; kada ka taɓa ruwan silicone kai tsaye don guje wa lalacewar da'irar ciki.
• Kada ka yi amfani da ƙarfin baya; dole ne kewayawa ta ba da izinin ƙarfin gaba kawai yayin kunna/kashe.
• Yi amfani da resistors masu iyakance ƙarfin lantarki; ko da ƙananan canje-canjen ƙarfin lantarki na iya haifar da manyan canje-canjen ƙarfin lantarki da ƙone LEDs.
• Zanen zazzabi yana da mahimmanci: tabbatar da isasshen rarraba zazzabi don hana rage haske da canza launi.
• Ka guji bayyanar da mahalli masu yawan sulfur, chlorine, da bromine (sulfur<100ppm, da Br<900ppm, da Cl<900ppm, jimlar Br+Cl<1500ppm).
• VOCs daga kayan haɗi na iya shiga cikin silicone kuma haifar da canza launi; gwada kayan don dacewa.

6.2 Jin daɗin Danshi da Ajiya

• Kafin buɗe jakar aluminum: ajiye a ≤30°C, ≤75%RH, a cikin shekara 1 daga kwanan wata.
• Bayan buɗewa: yi amfani a cikin sa'o'i 24 a ≤30°C, ≤60%RH.
• Idan ya wuce, ki gasa a 60±5°C na >24 hours.
• Kada ka yi amfani idan marufi ya lalace ko ya kumbura; tuntuɓi tallafin tallace-tallace.

6.3 Tsaftacewa

Idan tsaftacewa ya zama dole, an ba da shawarar isopropyl alcohol. Kada ka yi amfani da abubuwan da za su iya narkar da fakitin. Ba a ba da shawarar tsaftacewa ta ultrasonic ba saboda yana iya lalata LED ɗin.

7. Bayanin Marufi da Oda

7.1 Adadin Marufi

Marufi na yau da kullun: guda 50 a kowace akwati.

7.2 Abubuwan Gwajin Dogaro

7.3 Matsayin Kasawa

Bayan gwaji, ana ɗaukar na'urar ta gaza idan amfani da wuta ya wuce ±10% na ƙayyadaddun, ko kuma hasken haske ya faɗi ƙasa da 70% na darajar farko.

8. La'akari da Zane na Aikace-aikace

Lokacin zane da wannan G9 LED filament, yi la'akari da waɗannan: (1) Yi amfani da direban AC na ƙarfin aiki akai-akai tare da iyakance ƙarfin da ya dace. (2) Tabbatar da isasshen zazzabi; zazzabin haɗin dole ne ya wuce 125°C. (3) Don aikace-aikacen da za a iya ragewa, zaɓi masu ragewa masu dacewa waɗanda aka ƙera don LEDs na AC. (4) Yi la'akari da ƙarfin shiga. (5) LED ɗin ba samfurin spectroscopic ba ne; fiye da 90% na raka'a a cikin rukuni suna saduwa da siffofin lantarki/haske. (6) Ka guji damuwa na injiniya a kan filament ɗin.

9. Fa'idodin Fasaha

Idan aka kwatanta da fitilun filament na LED na gargajiya, wannan samfurin yana bayar da fakitin hadaddun, rarraba haske 360°, haɗawa mai sauƙi (walda), da kewayon zazzabin launi mai faɗi. Babban CRI (Ra≥80) da kyakkyawan darajar R9 suna tabbatar da sake haɗin launi mai haske. Jakar hana danshi da ƙimar MSL 5 suna tabbatar da dogaro yayin ajiya da walda.

10. Tambayoyi da Aka Yi Yawa

T: Me yasa ƙarfin aiki yake AC230V? A: An ƙera wannan LED don aiki kai tsaye a kan mains AC, yana sauƙaƙa zanen direba. T: Yaya zan tabbatar da kusurwar kallo 360°? A: Fakitin mai siffar filament yana fitar da haske daga kowane bangare. T: Me zan yi idan na'urar ta fuskanci danshi? A: Bi umarnin gasa don bushewa kafin amfani. T: Zan iya amfani da direban DC? A: Ƙayyadaddun ya dogara ne da AC; amfani da DC na iya rinjayar aiki. T: Menene tsawon rayuwa? A: Gwaje-gwajen dogaro sun nuna 1000 hours a zazzabin daki; ainihin rayuwa ya dogara da gudanar da zazzabi da yanayin aiki.

11. Misalan Aikace-aikace

Aikace-aikacen yau da kullun: maye gurbin fitilun halogen G9 a cikin chandeliers na ado, fitilun bango, da hasken ƙarƙashin katifa. Haske 360° da ƙaramin girman sun sa ya dace da maye gurbin abubuwan da ke akwai. Ana iya haɗa raka'a da yawa don samun babban haske.

12. Ka'idar Aiki

LED ɗin yana amfani da chip InGaN shudi wanda ke fitar da haske shudi (kololuwa ~450nm). Phosphor rawaya (sau da yawa YAG:Ce) yana canza wani ɓangare na haske shudi zuwa fitowar rawaya mai fadi. Haɗin shudi da rawaya yana samar da haske fari. Daban-daban na phosphor suna samun daban-daban na zazzabin launi (CCT) daga fari mai dumi (2200K) zuwa fari mai sanyi (6500K).

13. Hanyoyin Ci Gaba

Hanyoyin gaba na filaments na LED sun haɗa da mafi girman inganci (sama da 200 lm/W), mafi girman CRI (Ra>95), mafi kyawun aikin zazzabi, da rage girman. Ana kuma sa ran haɗawa da sarrafawa mai hankali (ragewa, daidaita launi). Siffar G9 za ta ci gaba da haɓaka don mafi dacewa da abubuwan da ke akwai.